Conveyor belts & hoses
Conveyor belts
Material conveying with belt grades selected for the service conditions.
- Cover tensile strength
- ≥15 MPa
- Cover elongation at break
- ≥350 %
- Cover abrasion loss
- ≤200 mm³
Rubber hoses pictured in the catalogue
Conveyor belts & hoses
Rubber hoses
Mining and industrial rubber hoses
Catalogue configurationThe catalogue specifies water, air, oil-transfer, acid/alkali, heat-resistant and sandblasting hose types, with application descriptions and cited standards. Braided, wire-reinforced and hydraulic hoses are also shown. New-product development is described; compounds, reinforcement, dimensions and fittings require selection for the intended medium.
Application
Transfer of water, air, oils, compatible chemicals or abrasive materials using the appropriate hose type.
01 / EQUIPMENT FEATURES
A closer look.
- 01
Textile- and wire-reinforced products
- 02
Application-specific hose descriptions
- 03
New-product development available
02 / TECHNICAL DATA
Specifications.
Review dimensions, performance and equipment details for this catalogue configuration. Confirm the final configuration with your quotation.
View source page ↗01Water hose
| Parameter | Specification |
|---|---|
| Reference standard (as printed) | HG2184 |
| Application | Water and neutral liquids at ambient temperature |
| Compound choices | Black inner layer; black/red/yellow/blue outer-layer options; EPDM compound available |
02Air hose
| Parameter | Specification |
|---|---|
| Reference standard (as printed) | GB1186 |
| Application | Air and inert gases at ambient temperature |
| Compound choices | Black inner layer; black/red/yellow/blue outer-layer options; EPDM compound available |
03Oil-transfer hose
| Parameter | Specification |
|---|---|
| Reference standard (as printed) | HG/T3083 |
| Application | Diesel, petrol and lubricating mineral oils at ambient temperature |
| Layer properties | Black inner layer; application-selected oil-, chemical- or heat-resistant outer compound |
04Acid/alkali hose
| Parameter | Specification |
|---|---|
| Reference standard (as printed) | HG/T2183 |
| Application | 40% sulphuric acid, 30% hydrochloric acid, 15% sodium hydroxide and compatible dilute solutions at ambient temperature; nitric acid excluded |
| Layer properties | Black inner layer; application-selected oil-, chemical- or heat-resistant outer compound |
05Heat-resistant hose
| Parameter | Specification |
|---|---|
| Reference standard (as printed) | Q/LXS014 |
| Application | Industrial water at temperatures not above 120°C |
| Layer properties | Black inner layer; application-selected oil-, chemical- or heat-resistant outer compound |
06Sandblasting hose
| Parameter | Specification |
|---|---|
| Reference standard (as printed) | HG/T2192 |
| Application | Abrasive materials including quartz sand, iron grit, cement and slurry |
| Layer properties | Abrasion- and impact-resistant inner layer; ageing-resistant outer layer |
Source: ZH catalogue · PDF 16 / EN catalogue · PDF 16
KEEP THE SOURCE AT HAND
Review. Compare. Enquire.
Your selected model is included automatically when you start an enquiry.
Full catalogue source · PDF page 16